ESP8266: Reading Voltage from SDM120 Modbus Power Energy Meter

 

http://en.trialcommand.com/blog/esp8266-slave-modbus-tcpip-no-libraries/

 

 

/*
 * More Tutorials: 
 * Website http://trialcommand.com
 * In English: http://en.trialcommand.com
 * En Espa├▒ol: http://en.trialcommand.com 
 */
#include <ESP8266WiFi.h>

const char* ssid = "KMTRONIC";
const char* password = "12345678";

// RS485 Control pin
const int RS485_control = D0;

// Receive buffer
long Buffer[9];

int VoltageReadCommand[] ={0x01, 0x04, 0x00, 0x00, 0x00, 0x02, 0x71, 0xCB};

int ModbusTCP_port = 502;

//////// Required for Modbus TCP / IP /// Requerido para Modbus TCP/IP /////////
#define maxInputRegister 20
#define maxHoldingRegister 20

#define MB_FC_NONE 0
#define MB_FC_READ_REGISTERS 3 //implemented
#define MB_FC_WRITE_REGISTER 6 //implemented
#define MB_FC_WRITE_MULTIPLE_REGISTERS 16 //implemented
//
// MODBUS Error Codes
//
#define MB_EC_NONE 0
#define MB_EC_ILLEGAL_FUNCTION 1
#define MB_EC_ILLEGAL_DATA_ADDRESS 2
#define MB_EC_ILLEGAL_DATA_VALUE 3
#define MB_EC_SLAVE_DEVICE_FAILURE 4
//
// MODBUS MBAP offsets
//
#define MB_TCP_TID 0
#define MB_TCP_PID 2
#define MB_TCP_LEN 4
#define MB_TCP_UID 6
#define MB_TCP_FUNC 7
#define MB_TCP_REGISTER_START 8
#define MB_TCP_REGISTER_NUMBER 10

byte ByteArray[260];
unsigned int MBHoldingRegister[maxHoldingRegister];

//////////////////////////////////////////////////////////////////////////

WiFiServer MBServer(ModbusTCP_port);

void setup() {

pinMode(14, OUTPUT);

// Set RS485 Control pin to OUTPUT
 pinMode(RS485_control, OUTPUT); 
 
 // Set pin to send data HIGH
 digitalWrite(RS485_control, HIGH);
 
 Serial.begin(2400);
 delay(100) ;
 WiFi.begin(ssid, password);
 delay(100) ;
 Serial.println(".");
 while (WiFi.status() != WL_CONNECTED) {
 delay(500);
 Serial.print(".");
 }
 MBServer.begin();
 Serial.println("Connected ");
 Serial.print("ESP8266 Slave Modbus TCP/IP ");
 Serial.print(WiFi.localIP());
 Serial.print(":");
 Serial.println(String(ModbusTCP_port));
 Serial.println("Modbus TCP/IP Online");
 
}


void loop() {

// Check if a client has connected // Modbus TCP/IP
 WiFiClient client = MBServer.available();
 if (!client) {
 return;
 }


 boolean flagClientConnected = 0;
 byte byteFN = MB_FC_NONE;
 int Start;
 int WordDataLength;
 int ByteDataLength;
 int MessageLength;
 
 // Modbus TCP/IP
 while (client.connected()) {
 
 if(client.available())
 {
 flagClientConnected = 1;
 int i = 0;
 while(client.available())
 {
 ByteArray[i] = client.read();
 i++;
 }

client.flush();

///// code here --- codigo aqui

///////// Holding Register [0] A [9] = 10 Holding Registers Escritura
 ///////// Holding Register [0] A [9] = 10 Holding Registers Writing
 
 // Set pin to HIGH > Transmit mode
 digitalWrite(RS485_control, HIGH); 
 
 // Send command to ModBus Meter
 for (int i=0; i < 8; i++) Serial.write(VoltageReadCommand[ i ]);
 delay(50);

// Set pin to LOW > Receive mode
 digitalWrite(RS485_control, LOW);
 
 // Waiting for receive reply
 while ( Serial.available()<9); 
 
 // Read reply in Buffer[];
 for (int i=0; i < 9; i++) Buffer[i] = Serial.read();

// Print voltage data received
 Serial.println();
 Serial.print(Buffer[3], HEX); Serial.print(" ");
 Serial.print(Buffer[4], HEX); Serial.print(" ");
 Serial.print(Buffer[5], HEX); Serial.print(" ");
 Serial.print(Buffer[6], HEX); Serial.print(" "); 
 Serial.println();

// Convert to Float
 float x;
 ((byte*)&x)[3]= Buffer[3];
 ((byte*)&x)[2]= Buffer[4];
 ((byte*)&x)[1]= Buffer[5];
 ((byte*)&x)[0]= Buffer[6];
 
 // Convert to Float
 Serial.print(x,2);
 Serial.println(" Volts");

MBHoldingRegister[0] = word(Buffer[3],Buffer[4]);
 MBHoldingRegister[1] = word(Buffer[5],Buffer[6]);
 MBHoldingRegister[4] = random(0,12);
 MBHoldingRegister[5] = random(0,12);
 MBHoldingRegister[6] = random(0,12);
 MBHoldingRegister[7] = random(0,12);
 MBHoldingRegister[8] = random(0,12);
 MBHoldingRegister[9] = random(0,12);


 ///////// Holding Register [10] A [19] = 10 Holding Registers Lectura
 ///// Holding Register [10] A [19] = 10 Holding Registers Reading
 
 int Temporal[10];
 
 Temporal[0] = MBHoldingRegister[10];
 Temporal[1] = MBHoldingRegister[11];
 Temporal[2] = MBHoldingRegister[12];
 Temporal[3] = MBHoldingRegister[13];
 Temporal[4] = MBHoldingRegister[14];
 Temporal[5] = MBHoldingRegister[15];
 Temporal[6] = MBHoldingRegister[16];
 Temporal[7] = MBHoldingRegister[17];
 Temporal[8] = MBHoldingRegister[18];
 Temporal[9] = MBHoldingRegister[19];

/// Enable Output 14
 digitalWrite(14, MBHoldingRegister[14] );


 //// debug

for (int i = 0; i < 10; i++) {

Serial.print("[");
 Serial.print(i);
 Serial.print("] ");
 Serial.print(Temporal[i]);
 
 }
 Serial.println("");


//// end code - fin 


//// rutine Modbus TCP
 byteFN = ByteArray[MB_TCP_FUNC];
 Start = word(ByteArray[MB_TCP_REGISTER_START],ByteArray[MB_TCP_REGISTER_START+1]);
 WordDataLength = word(ByteArray[MB_TCP_REGISTER_NUMBER],ByteArray[MB_TCP_REGISTER_NUMBER+1]);
 }
 
 // Handle request

switch(byteFN) {
 case MB_FC_NONE:
 break;
 
 case MB_FC_READ_REGISTERS: // 03 Read Holding Registers
 ByteDataLength = WordDataLength * 2;
 ByteArray[5] = ByteDataLength + 3; //Number of bytes after this one.
 ByteArray[8] = ByteDataLength; //Number of bytes after this one (or number of bytes of data).
 for(int i = 0; i < WordDataLength; i++)
 {
 ByteArray[ 9 + i * 2] = highByte(MBHoldingRegister[Start + i]);
 ByteArray[10 + i * 2] = lowByte(MBHoldingRegister[Start + i]);
 }
 MessageLength = ByteDataLength + 9;
 client.write((const uint8_t *)ByteArray,MessageLength);
 
 byteFN = MB_FC_NONE;
 
 break;
 
 
 case MB_FC_WRITE_REGISTER: // 06 Write Holding Register
 MBHoldingRegister[Start] = word(ByteArray[MB_TCP_REGISTER_NUMBER],ByteArray[MB_TCP_REGISTER_NUMBER+1]);
 ByteArray[5] = 6; //Number of bytes after this one.
 MessageLength = 12;
 client.write((const uint8_t *)ByteArray,MessageLength);
 byteFN = MB_FC_NONE;
 break;
 
 case MB_FC_WRITE_MULTIPLE_REGISTERS: //16 Write Holding Registers
 ByteDataLength = WordDataLength * 2;
 ByteArray[5] = ByteDataLength + 3; //Number of bytes after this one.
 for(int i = 0; i < WordDataLength; i++)
 {
 MBHoldingRegister[Start + i] = word(ByteArray[ 13 + i * 2],ByteArray[14 + i * 2]);
 }
 MessageLength = 12;
 client.write((const uint8_t *)ByteArray,MessageLength); 
 byteFN = MB_FC_NONE;
 
 break;
 }
 }

}

 

 

 

 

 

Add temperature sensor in Domoticz: KMtronic LAN DS18B20 WEB Temperature Monitor

KMtronic LAN DS18B20 WEB Temperature Monitor

 

Domoticz: KMtronic LAN DS18B20 WEB Temperature Monitor
Domoticz: KMtronic LAN DS18B20 WEB Temperature Monitor

 

Domoticz: KMtronic LAN DS18B20 WEB Temperature Monitor
Domoticz: KMtronic LAN DS18B20 WEB Temperature Monitor

 

Domoticz: KMtronic LAN DS18B20 WEB Temperature Monitor
Domoticz: KMtronic LAN DS18B20 WEB Temperature Monitor

 

 

Domoticz: KMtronic LAN DS18B20 WEB Temperature Monitor
Domoticz: KMtronic LAN DS18B20 WEB Temperature Monitor

 

 

LOG file

 

2018-04-02 14:13:12.546 (KMtronic DS18B20 Temperature Monitor) Temp (Boiler)
2018-04-02 14:13:12.547 (KMtronic DS18B20 Temperature Monitor) Temp (Office 1)
2018-04-02 14:13:12.548 (KMtronic DS18B20 Temperature Monitor) Temp (Office 2)
2018-04-02 14:13:12.549 (KMtronic DS18B20 Temperature Monitor) Temp (Store)