How to control UDP Relays by Loxone Home Automation Miniserver

What is a Loxone Smart Home?

A Loxone Smart Home takes care of tasks around your home automatically, freeing up your time for the more important things in life. It’s living as you’ve always known it, but better.

 

Control UDP Relays by Loxone Home Automation Miniserver
Control UDP Relays by Loxone Home Automation Miniserver

 

Control UDP Relays by Loxone Home Automation Miniserver
Control UDP Relays by Loxone Home Automation Miniserver

 


You can control next UDP Relays

 

UDP LAN Ethernet IP 2 channels Relay Controller
UDP LAN Ethernet IP 2 channels Relay Controller
UDP LAN Ethernet IP Eight channels Relay Controller
UDP LAN Ethernet IP Eight channels Relay Controller

KMtronic UDP LAN Ethernet IP Eight channels Relay Controller

UDP LAN Ethernet IP Eight channels Relay Controller
UDP LAN Ethernet IP Eight channels Relay Controller
UDP LAN Ethernet IP Eight channels Relay Controller

 

Features:
• Fully assembled and tested.
Each relay has an LED to indicate when it is operated.
Relay outputs can be used to turn ON/OFF lights, motors and other devices. 

Model:
UD8CR

Complete including:
One LAN Eight relay controller

Required power:
12VDC / 1000 mA.

Specifications:
Relays have Normally Open (NO) and
Normally Closed (NC) Contacts each capable of switching max:
– 12VDC/15A
– 24VDC/15A
– 125VAC/15A
– 250VAC/10A

Dimensions:
KMTronic_8Relay_Dimension.pdf

Default Settings:
IP address: 192.168.1.199
Webserver Port: 80 (for initial configuration with username/password)
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
UDP Port: 12345
Username: admin
Password: admin

Reset to Default Settings:
Hold Reset button for 10 seconds

UDP Commands:
FF0000 – Status Read command (ASCII encoding)

FF0100 – Relay 1 OFF command (ASCII encoding)
FF0101 – Relay 1 ON command (ASCII encoding)

FF0200 – Relay 2 OFF command (ASCII encoding)
FF0201 – Relay 2 ON command (ASCII encoding)

…………

FF0800 – Relay 8 OFF command (ASCII encoding)
FF0801 – Relay 8 ON command (ASCII encoding)

FFE000 – All relays OFF command (ASCII encoding)
FFE0FF – All relays ON command (ASCII encoding)

 

 

KMtronic UDP LAN Two channels Relay Ethernet IP Controller – BOX

UDP LAN Two channels Relay Ethernet IP Controller - BOX
UDP LAN Two channels Relay Ethernet IP Controller – BOX

 

Features:
– Fully assembled and tested.
Each relay has an LED to indicate when it is operated.
Relay outputs can be used to turn ON/OFF lights, motors and other devices. 

Model:
UD2CRB

Complete including:
One LAN Two relay controller

Required power:
12VDC / 1000 mA.

Specifications:
Relays have Normally Open (NO) and
Normally Closed (NC) Contacts each capable of switching max:
– 12VDC/15A
– 24VDC/15A
– 125VAC/15A
– 250VAC/10A

Dimensions:
110 mm / 55 mm / 25 mm

Default Settings:
IP address: 192.168.1.199
Webserver Port: 80 (for initial configuration with username/password)
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
UDP Port: 12345
Username: admin
Password: admin

Reset to Default Settings:
Hold Reset button for 10 seconds

UDP Commands:
FF0000 – Status Read command (ASCII encoding)

FF0100 – Relay 1 OFF command (ASCII encoding)
FF0101 – Relay 1 ON command (ASCII encoding)

FF0200 – Relay 2 OFF command (ASCII encoding)
FF0201 – Relay 2 ON command (ASCII encoding)

FFE000 – All relays OFF command (ASCII encoding)
FFE003 – All relays ON command (ASCII encoding)

 

 

KMtronic UDP LAN Two channels Relay Ethernet IP Controller – PCB

KMtronic UDP LAN Two channels Relay Ethernet IP Controller - PCB
KMtronic UDP LAN Two channels Relay Ethernet IP Controller – PCB

Features:
– Fully assembled and tested.
– Each relay has an LED to indicate when it is operated.
Relay outputs can be used to turn ON/OFF lights, motors and other devices. 

Model:
UD2CR

Complete including:
One LAN Two relay controller

Required power:
12VDC / 1000 mA.

Specifications:
Relays have Normally Open (NO) and
Normally Closed (NC) Contacts each capable of switching max:
– 12VDC/15A
– 24VDC/15A
– 125VAC/15A
– 250VAC/10A

Dimensions:
105 mm / 51 mm / 20 mm

Drivers:
IP address: 192.168.1.199
Webserver Port: 80 (for initial configuration with username/password)
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
UDP Port: 12345
Username: admin
Password: admin

Reset to Default Settings:
Hold Reset button for 10 seconds

UDP Commands:
FF0000 – Status Read command (ASCII encoding)

FF0100 – Relay 1 OFF command (ASCII encoding)
FF0101 – Relay 1 ON command (ASCII encoding)

FF0200 – Relay 2 OFF command (ASCII encoding)
FF0201 – Relay 2 ON command (ASCII encoding)

FFE000 – All relays OFF command (ASCII encoding)
FFE003 – All relays ON command (ASCII encoding)